Concrete is a porous material, whether it is used for basement slabs, garage floors, driveways or sidewalks. It can easily absorb many liquids, leading to unsightly stains. Although most concrete floors should be maintenance free, cleaning your concrete floors regularly will prevent pre-mature deterioration from oil and road salt deposits. Follow these tips for keeping your concrete stain free.
General Cleaning
1 ? Clean out garage completely, sweep or vacuum out all dust and debris.
2 ? Hook up your hose and soak entire floor. Apply your floor cleaner, following manufacturers instructions. Allow time for the cleaner to penetrate. Work cleaner into the floor with a stiff push broom.
3 ? Hose off entire floor and allow to dry.
Oil Stains
1 ? Dampen sawdust with paint thinner.
2 ? Apply sawdust mix over stain. Paint thinner will break down the oil and the sawdust will absorb it.
3 ? Allow the sawdust to sit for a day or two and sweep up the sawdust. Re-apply as if necessary.
4 ? If stain still remains, sprinkle dry cement mix over stain and let it sit for 2 days. Sweep up as needed.
Tire Tracks
Soak the area and apply a commercial degreasing product. Allow it to sit for a few hours and scrub off using a stiff bristle brush.
Rust Stains
Mix one part sodium citrate crystals to six parts water. Add Enough poultice to make a paste. Spread paste over stain and allow to dry. Scrape off dry paste, rust should be removed. Repeat if necessary.
Iron Marks
Brush a solution of oxalic acid and water over the stain. Allow it to soak for a few hours and scrub with a stiff wire brush.
Read more articles about
Category Floors, HOW TOS, Outdoors
Source: http://homeimprovementzone.com/2011/05/stained-concrete/
pandemic 2 clear columbus dispatch marisa miller sarah shahi painting state farm
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.